25.4*2.11MM ASTM A213 S30403 STAINLESS STEEL HEAT EXCHANGER WELDED TUBE
Standard: ASTM A269 - 10ï¼›ASTM A312 / A312M - 12ï¼›ASTM A789 / A789M - 10a ï¼›ASTM A790 / A790M - 11
Material:304,1.4301,X5CrNi18-10;304H,S30415,1.4948,S30409;304L,1.4306,S30403,1.4307:
Outer Diameter:3.18mm-101.60mm WallThickness: 0.50mm-20.00mm
Length: Normally fixed length 6mcan as per customer's requirement
Category: Welded Pipe
Standard: ASTM A269 - 10ï¼›ASTM A312 / A312M - 12ï¼›ASTM A789 / A789M - 10a ï¼›ASTM A790 / A790M - 11
Material:304,1.4301,X5CrNi18-10;304H,S30415,1.4948,S30409;304L,1.4306,S30403,1.4307:
Outer Diameter:3.18mm-101.60mm WallThickness: 0.50mm-20.00mm
Length: Normally fixed length 6mcan as per customer's requirement
Category: Welded Pipe
Standard: ASTM A269 - 10ï¼›ASTM A312 / A312M - 12ï¼›ASTM A789 / A789M - 10a ï¼›ASTM A790 / A790M - 11
Material:304,1.4301,X5CrNi18-10;304H,S30415,1.4948,S30409;304L,1.4306,S30403,1.4307:
Outer Diameter:3.18mm-101.60mm WallThickness: 0.50mm-20.00mm
Length: Normally fixed length 6mcan as per customer's requirement
Category: Welded Pipe
Specifications
-
a) Petroleum , chemical enterprise , super heater of boiler and heat exchangerb) High temperature-resistant transmission fluid pipe in power stationc) Ship with pressure pipe
d) Exhaust purifcation device
e) Construction and ornament
f) solar industry , military , semiconductor etc
-
1 .We use Cold Drawn techonology to produce U bend tube2 .U bend tubes produce will accordance to customer's drawings3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at therequired flow rate
4 . The radius is checked for its OD and wall thinning with the recommendedspecifcation
5 We'll choose three different position or as customer's require to make suretubes quality .We'll do physical properties and micro-structure test6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test7 Each tube is then hdro tested at the recommended pressure to check for leakage
-
We offer product with tolerance complies with the norm (Specific tolerance requirement is possible. Please contact our sales specialists.)
